
Fanglin
19. Nov. 2026
In physical vapor deposition (PVD), coating performance depends not only on the deposited material, but also on the condition of the substrate surface and the energy of particles during film growth. Applying an appropriate bias enables ions in the plasma to act on both the substrate and the growing film, providing greater flexibility to improve coating adhesion and control film structure.
From Surface Cleaning to Film Growth: Unlocking More Possibilities for PVD Coatings with Bias Technology
VPI DC and RF bias processes help optimize thin-film interfaces and performance.
In physical vapor deposition (PVD), coating performance depends not only on the deposited material, but also on the condition of the substrate surface and the energy of particles during film growth. Applying an appropriate bias enables ions in the plasma to act on both the substrate and the growing film, providing greater flexibility to improve coating adhesion and control film structure.
Under the specified process gas pressure of 10–20 Pa, the bias assembly can be used with either DC or RF biasing to explore process options for different materials and coating requirements.
How Does Biasing Help PVD Coating?
Pre-Deposition Cleaning for a Better Coating–Substrate Interface
Before deposition, appropriate ion bombardment can clean and activate the substrate surface, helping remove some surface adsorbates and contaminants. This creates more favorable interface conditions for subsequent film nucleation and adhesion.
Assisted Film Growth for a Denser Structure
During deposition, appropriate ion bombardment can influence the surface mobility and packing of film-forming particles. This helps control the film’s microstructure and, within a suitable process window, can promote film densification.
More Flexibility in Tailoring Performance
By adjusting the bias and related process parameters, manufacturers can explore the balance between coating adhesion, hardness, internal stress and other properties for different substrates, coating systems and application goals. Actual results should be verified for the specific materials and process.
DC and RF Bias: Different Options for Different Applications
Bias Type | Application Value |
DC Bias | Suitable for bias treatment of conductive substrates. It can be used for pre-deposition ion cleaning and to adjust ion bombardment during deposition. |
RF Bias | Can be used in processes involving insulating substrates, such as glass and ceramics, as well as dielectric films. It offers an option for applications where direct DC biasing is unsuitable. |
From interface preparation to film growth, biasing provides an important dimension of control in PVD processes. VPI works with customers to explore suitable bias process solutions based on their substrates, coatings and application requirements, helping bring the coating process closer to the desired performance goals.